Aircraft & Helicopter Doors

Interior door locking mechanisms and attachment hardware
Interior hatch locking mechanism and hardware
Jettison mechanisms and hardware
Locking tumblers
All hinges
All external jettison shafts and spring pins
Gas strut attachment points
Upper and lower tracks of cabin sliding door
All door latches

Magnesium Parts

Sundstrand Aerospace wrote a specification using FLUID FILM Liquid A for preservation of magnesium castings

Aircraft Under-Wing Bolts & Nuts

Bilge Area

Cabin and Cockpit Seat Tracks

Cable Pressure Seal Lubrication

Cable Pulley Lubrication

Cargo Door Tracks and Rollers

Clean & Lubricate Cable Turn-Barrels

Cowlings and Fairings

Dry Bay

Electrical Connections

Flight Control Pushrods

Apply Liquid A on the inside of the tube and on the adapter/reducer tube external surfaces after adjustment in order to encapsulate the entire adjustable end
Apply Liquid AR on all internal and external threaded surfaces before assembly of the pushrod

Free Up Adjusters & Lubricate Same in Flight Control Assemblies

Fuel Bay Cells

Gravity and Single Point Refuel Compartments

Helicopter Outer Interior Bays with FLUID FILM & FLUID FILM Liquid A

Hinges & Guide Pins

Horizontal Stabilizer

Hydraulic Fittings and Unions

Landing Gear Doors

Liquid AR for Stabilizer Vertical Rods

Magnesium Parts

Sundstrand Aerospace wrote a specification using FLUID FILM Liquid A for preservation of magnesium castings

Main Landing Gear Wheel Wells

Nose Wheel Well

Pylon

Rudder and Elevator

Turrets & Aircraft Carrier Elevator Guide Rails

Upper Deck Flight Control Rods