FLUID FILM Battens Down the Hatches on Corrosion
FLUID FILM's Powerful Performance begins with the natural moisturizing and water-repelling properties of lanolin, natures own protector from the harshness of rugged climates and environments. FLUID FILM coatings create an airtight shield that safeguard metals in the most corrosive of atmospheres, yet remain safe on paint and plastics. Pliable, active and slick, FLUID FILM soft-coatings penetrate and migrate without evaporation, leaving an expansive, non-conductive film that is highly resistant to water wash off and corrosive elements.
Applications in the Boating Industry
![]() |
|
|
I recently had to replace the leaf springs on a used boat trailer. Leaf springs cannot be coated with any success due to flexing. I researched various products and chose FLUID FILM. After a year the springs still look like new after many immersions in salt water. |
|
- Jonathan Costello |
![]() |
|
![]() |
|
![]() |
Running fishing charters on Lake Michigan can really put your gear through the worst. Each year I would grease the bearings/drags etc. but I was having problems with corrosion on the graphite / titanium parts of the reels. You figure their use, being wet, being dry, and baking in the summer sun, this would damage anything. I picked up a can and tested it out on three reels (inside and out). They not only look brand new but act brand new as well. So I used Fluid Film on all the reels (about 36) and have kept them on the back of my boat through rain, intense sun, dry conditions, cool to hot etc. and they still look the same…excellent! You definitely have a customer for life. Thank you! |
|
- Capt Tom Pataska |
| Back on top ↑ | |





